Screen shot 2013-07-03 at 2.01.01 PMPor-Rok® High Flex Mortar

Por-Rok® High Flex Mortar is a high strength, two component, polymer modified, trowelable, cementitious, patching and resurfacing mortar. Por-Rok® High Flex Mortar is formulated specifically for patching concrete on horizontal and vertical surfaces where higher flexural and tensile strengths are needed.

Specifications and MSDS Sheet Coming Soon

Applications:

To patch concrete on horizontal and vertical surfaces, interior and exterior, above and below grade. To structurally repair concrete on parking facilities, ramps, bridges, tunnels and balconies. Resurfacing un-level or damaged concrete. Pitching or sloping areas for water run off.

 

 

1063056_81461987

Screen shot 2013-07-03 at 2.01.08 PMPor-Rok® HF Flowable Mortar

Por-Rok® HF Flowable Mortar is a fast setting, polymer modified, two component cementitious, patching and a resurfacing mortar. Por-Rok® HF Flowable Mortar is formulated specifically for patching concrete on horizontal and formed surfaces where high bond strengths are required.

Specifications and MSDS Sheet Coming Soon

Applications:

To resurface un-level or damaged concrete. For grouting hard to reach areas. Patching concrete on horizontal and vertical surfaces, interior and exterior, above and below grade. Also for structurally repairing concrete on parking facilities, ramps, bridges, tunnels and balconies.

 

Screen shot 2013-07-03 at 1.59.39 PMPor-Rok® HB Non-Sag Mortar

Por-Rok® HB Non-Sag Mortar is a high bonding, fast setting, high strength, polymer modified, non-sag, two component, fast setting gel mortar. It is formulate specifically for trowel applications on vertical and overhead surfaces where low shrinkage and high flexural strengths are needed.

Specifications and MSDS Sheet Coming Soon

Applications:

Used for filling form tie-holes, honeycombs and other voids in concrete and masonry. Patching concrete and masonry on vertical and overhead surfaces, interior and exterior, above and below grade. Also for structurally repairing concrete on parking facilities, ramps, bridges, tunnels and balconies.

 

 

Screen shot 2013-07-03 at 1.59.45 PM1392575_19747799Por-Rok® Non-Sag Mortar

Por-Rok® Non-Sag Mortar is a fast setting, cementitious, non-sagging, one component patching mortar designed for the repair of vertical and overhead concrete and masonry surfaces. Por-Rok® Non-Sag Mortar has a working time of 10 to 20 minutes when mixed with 700 F (210 C) water.

Specifications and MSDS Sheet Coming Soon

Applications:

Used for restoring disintegrated concrete or masonry surfaces on vertical and overhead surfaces, interior and exterior, above and below grade. Also for repairing concrete on parking piles, curbs, steps or pre-cast.